If you are a watch enthusiast and have a love for vintage timepieces, you know how satisfying it is to restore them to their original condition. However, restoring non-shock protected watches comes with its own unique set of challenges. In this vintage watch repair tutorial, we’ll provide you with a comprehensive guide to restoring non-shock protected watches. Whether you’re a seasoned watch repairer or a beginner, this guide is sure to equip you with the knowledge needed to bring these watches back to life. Let’s dive in!

Vintage Watch Repair Tutorial: Restoring Non-Shock Protected Watches” – A Guide for Watch Enthusiasts

If you are a watch enthusiast, you must have come across vintage non-shock watches and pocket watches. These watches are beautiful and unique, but they require extra care when it comes to servicing and repair. In this guide, we will take you through the steps required to service and restore non-shock protected watches.

Introduction

Non-shock protected watches have a greater risk of damage when compared to shock-protected movements. Shock-protected watch movements are easy to deal with when it comes to lubrication. However, non-shock protected watches require more attention and care. There are several kinds of shock protection systems, such as Inca block assembly, novadayak, and kif. When it comes to non-shock watches, you cannot rely on the movement to protect itself. It is essential to take extra measures to ensure that the watch is protected against damage.

Step-by-Step Guide

If you are up for the challenge, here is a step-by-step guide on how to service and restore non-shock protected watches.

Step 1: Disassembling the Watch

Disassembling the watch is the first step in repairing a non-shock protected watch. Since non-shock balance end stones can be complicated to lubricate, you need to completely disassemble the balance. Removing the screws holding the end stone mounting can be dangerous since end stone jewels are very brittle and prone to crack or shatter.

Step 2: Cleaning the Watch

After disassembling the watch, it is time to clean all the parts. You can use ultrasonic cleaners and low-concentration cleaning solutions to clean the watch. However, you need to be careful when cleaning non-shock watches. Harsh chemicals can damage the watch and make it difficult to restore.

Step 3: Lubricating the Watch

Lubricating non-shock balance end stones can be complicated since there is a risk of oil displacement during reassembly. To reduce this risk, it is essential to remove the balance. After cleaning all the parts, it is time to lubricate and reassemble the balance. The index can be used to decrease the risk of oil displacement during reassembly. It is critical to use proper oil amounts while oiling end stones to ensure that the balance remains in good condition.

Step 4: Reassembling the Watch

After lubricating the watch, it is time to reassemble the watch. This can be a challenging task, especially when dealing with the end stone mounted to the main plate. There’s a risk of displacing the oil while securing the mount back to the plate. It is essential to be gentle when reassembling the watch.

FAQs

1. Can I use the same cleaning solutions for non-shock watches and shock-protected watches?
   A: No, non-shock watches require gentle cleaning solutions to prevent damage to the watch.

2. Do I need special tools to disassemble non-shock watches?
   A: No, you can use regular watch repair tools. However, you need to be careful when removing the screws holding the end stone mounting.

3. How often should I service my non-shock watch?
   A: Non-shock watches require servicing every three to five years or when it stops running correctly.

4. Can I use any oil to lubricate my non-shock watch?
   A: No, you need to use oil specifically designed for watch lubrication.

5. Is it possible to restore vintage non-shock watches?
   A: Yes, it is possible to restore vintage non-shock watches with the right tools and expertise.

Conclusion

In conclusion, restoring non-shock protected watches requires extra care and attention. If you are not experienced in watch repair, it’s best to leave it to the professionals. However, with the right tools and expertise, you can restore your vintage non-shock watch to its full glory. With proper servicing, your non-shock watch will run smoothly for years to come.

The Watch Repair Course is available for enrollment, with full HD video lessons streamed to your PC/MAC, Phone or Tablet. These video lessons will guide you step-by-step through watch repair and servicing. With the Watch Repair Course, you can learn how to restore vintage non-shock watches and pocket watches quickly.