Welcome to the fourth edition of Random Clock Talks! In today’s fast-paced world, it’s becoming increasingly difficult to find moments of genuine connection with others. That’s why we created this series – to encourage people to slow down, reflect, and engage in meaningful conversations with one another. Join us as we embark on a journey of exploration, delving into timeless topics and uncovering new perspectives. Get ready to sit back, relax, and let time take its course as we engage in another edition of Random Clock Talks.

Engage in Timeless Conversations: Random Clock Talks Vol 4

Introduction

Time is an invaluable resource. It is the essence of our life, and it is limited. Therefore, the way we manage our time is crucial. In the world of horology, time is not only limited but also precious. Clockmaking is an art, a science, and a craft. It requires different skills, knowledge, and dexterity. One of the most skillful and entertaining clockmakers of our time is J.M. Huckabee. He is known for his Random Clock Talks series. In this article, we are going to explore volume 4, produced in 1990 with AWCI. We will discuss the basic assembly and disassembly of Urgos 21/42 8-day trapezoid time only clock. We will cover magnetism, gear train, and pendulum. We will explain the importance of releasing mainspring power before disassembling. We will also discuss the removal of doll works and mainspring barrel, escapement anchor, and crutch adjustment. Finally, we will conclude with a video demonstration of disassembly provided in the link.

Basic assembly and disassembly of Urgos 21/42 8-day trapezoid time only clock

The Urgos 21/42 8-day trapezoid clock is a magnificent piece of art. Its stunning design and precision make it an exquisite addition to any collection. However, repairing or servicing it requires some knowledge and skill. The first step is to release the mainspring power before disassembling it. This is done by removing the weight from the clock and moving the hands to 12 o’clock.

Removal of doll works and mainspring barrel

The next step is to remove the doll works and mainspring barrel. The doll works are the gears that transfer the power from the mainspring to the escapement. The mainspring barrel holds the mainspring which provides the power to the clock. To remove the doll works, you need to loosen the screws that hold the bridge in place. Then, remove the bridge and the gears. To remove the mainspring barrel, you need to unscrew the barrel arbor and take the mainspring out.

Escapement anchor removal discussed with potential loss of adjustment

The escapement anchor is the device that regulates the rate at which the clock runs. It consists of the pallets, the anchor, and the crutch. To remove the escapement anchor, you need to loosen the screws that hold the anchor in place. However, removing the escapement anchor can result in the loss of adjustment.

Description of strap-type escapement anchor

The strap-type escapement anchor is a type of anchor that is secured to the pallet arbor with a strap. It is used in some clocks to reduce the vibration of the escape wheel.

Friction fit crutch adjustment

The crutch is the device that transfers the motion from the pendulum to the escapement. To adjust the crutch, you need to loosen the friction fit and move the crutch up or down.

Canon pinion cannot be readily removed

The canon pinion is the device that transfers the motion from the minute hand to the hour hand. It is attached to the center arbor of the clock. It cannot be readily removed.

Gear train disassembly

The gear train is the mechanism that transfers the power from the mainspring to the escapement. It consists of the center wheel, the third wheel, the fourth wheel, and the escape wheel. To disassemble the gear train, you need to remove the center wheel and the third wheel by loosening the screws that hold them in place. Then, remove the fourth wheel and the escape wheel.

Movement cannot be readily disassembled due to certain parts

The movement of the clock cannot be readily disassembled due to certain parts, such as the canon pinion and the center arbor, that cannot be removed easily.

Video demonstration of disassembly provided in the link

To help you with the disassembly and reassembly of the Urgos 21/42 8-day trapezoid clock, we have provided a video demonstration in the link. This video will guide you through the process step by step and make it easier for you to repair or service your clock.

Conclusion

Clockmaking is an art, a science, and a craft. It requires different skills, knowledge, and dexterity. The Urgos 21/42 8-day trapezoid clock is a magnificent piece of art that requires some knowledge and skill to repair or service. We hope this article has provided you with valuable information on the basic assembly and disassembly of the clock. Remember to be cautious and gentle when working with the delicate parts of the clock.

FAQs After The Conclusion

1. What is the Urgos 21/42 8-day trapezoid clock?
2. Who is J.M. Huckabee?
3. Why is it important to release the mainspring power before disassembling a clock?
4. What is the canon pinion?
5. How can I adjust the crutch of the clock?